POWER AMP I-SERIES ออกแล้วกับ A & J
มีด้วยกัน 3 รุ่น
- 2400i
- 3600i
- 5000i
เสป็ค ตามนี้ครับ
รุ่น 2400i
8Ω stereo* : 700 Wrms/ch
4Ω stereo* : 1100 Wrms/ch
2Ω stereo** : 2200 Wrms/ch
8Ω bridge* : 2200 W
4Ω bridge** : 4000 W
รุ่น 3600i
8Ω stereo* : 1100 Wrms/ch
4Ω stereo* : 1800 Wrms/ch
2Ω stereo** : 3000 Wrms/ch
8Ω bridge* : 4000 W
4Ω bridge** : 6000 W
รุ่น 5000i
8Ω stereo* : 1800 Wrms/ch
4Ω stereo* : 2500 Wrms/ch
2Ω stereo** : 3700 Wrms/ch
8Ω bridge* : 4600 W
4Ω bridge** : 7200 W
** not recommend to used continue
Other specification
Frequency response : 20 Hz 20 kHz
THD+N : <0.05%
S/N rate : >90 dB
Damping factor : >500
Crosstalk : >70 dB
Slew rate : >20V/μs
Input sensitivity : 1V /1.4V/32 dB
Input impedance (bal/unbal) : 10kΩ/20 kΩ
Voltage gain(sensitivity:38 dB): 37.4dB
Output circuitry : Class I
Cooling Air : flow from front to rear
Protection
Soft start, DC, short circuit, over load, clip limit, over heat, progressive volume, VHF, reduce power on high temperature
Connector
Input : XLR-F、XLR-M
output : Binding posts, NL4 SPEAKON
Function
Front indictor : STY, LCD screen, signal, clip, protection, volume adjustment
Front panel : Power switch, LCD screen: temperature/ volume/malfunction warning, volume control knob
Rear panel : Stereo/ parallel/ bridge switch, input sensitivity switch, grounding switch
Dimension/weight
Product dimension (W x D x H) : 2U/15
Packing dimension (W x D x H) : 59.5*56.5*17.0
N.W. 14.0kg for 5000i
Power
Non-removable IEC power cord ;AC220V/50Hz.±10%
Remark:
1、* The power is tested under EIA standard.
2、** The power is tested under the condition of 40ms burst, 1KHz sine wave and 1% THD.
