Tigger Sound
ห้องสมุด คลังความรู้ต่างๆ ในแวดวงเครื่องเสียง
=> แบบตู้ลำโพง สูตรตู้ ตู้ลำโพงกลางแจ้ง ตู้ลำโพงซับ ตู้ลำโพง เสียงกลางแหลม => ข้อความที่เริ่มโดย: alexit ที่ มีนาคม 06, 2011, 07:14:30 pm
-
excused for my English, I ask aid in order to plan line Array with component p.audio
Characteristics: 2 x 8" (sn-8mb) 2 x 10" (sn-10mb) or 1 x 12" (sn12-B) only p.audio
wave guide : CL-WG + PH-CL25 + sn-d44
Thanks
แวมไพร์แก้ไขครับ
-
excused for my English, I ask aid in order to plan line Array with component p.audio
Characteristics: 2 x 8" (sn-8mb) 2 x 10" (sn-10mb) or 1 x 12" (sn12-B) only p.audio
wave guide : CL-WG + PH-CL25 + sn-d44
Thanks
any idea for cabinet ???? http://img15.imageshack.us/i/arrayline221i.jpg/ http://img26.imageshack.us/i/arrayline222i.jpg/
-
where are you who ?
-
ทีมงานทิกเกอร์กรุณาช่วยแปลให้ด้วยครับ เว็ปทิกเกอร์โกอินเตอร์แล้วครับฝรังเข้ามาศึกษาหาข้อมูลด้วยครับ
ขอบคุณครับ
-
excused for my English, I ask aid in order to plan line Array with component p.audio
Characteristics: 2 x 8" (sn-8mb) 2 x 10" (sn-10mb) or 1 x 12" (sn12-B) only p.audio
wave guide : CL-WG + PH-CL25 + sn-d44
Thanks
แล้วผมจะบอกว่ากรุณาลงลายเซนต์ก่อนครับจะต้องพูดอย่างไรครับ
-
excused for my English, I ask aid in order to plan line Array with component p.audio
Characteristics: 2 x 8" (sn-8mb) 2 x 10" (sn-10mb) or 1 x 12" (sn12-B) only p.audio
wave guide : CL-WG + PH-CL25 + sn-d44
Thanks
แล้วผมจะบอกว่ากรุณาลงลายเซนต์ก่อนครับจะต้องพูดอย่างไรครับ
ถ้าเป็นแบบคำสั่งก็บอกไปเลยว่า"Show your poto now!"
แต่ถ้าเป็นแบบสุภาพก็เติมคำว่า "Please"ต่อท้ายหรือนำหน้าประโยคเข้าไป
-
excused for my English, I ask aid in order to plan line Array with component p.audio
Characteristics: 2 x 8" (sn-8mb) 2 x 10" (sn-10mb) or 1 x 12" (sn12-B) only p.audio
wave guide : CL-WG + PH-CL25 + sn-d44
Thanks
แล้วผมจะบอกว่ากรุณาลงลายเซนต์ก่อนครับจะต้องพูดอย่างไรครับ
ถ้าเป็นแบบคำสั่งก็บอกไปเลยว่า"Show your poto now!"
แต่ถ้าเป็นแบบสุภาพก็เติมคำว่า "Please"ต่อท้ายหรือนำหน้าประโยคเข้าไป
ขอบคุณครับ เหมือนพระมาโปรดเลยครับ
-
excused for my English, I ask aid in order to plan line Array with component p.audio
Characteristics: 2 x 8" (sn-8mb) 2 x 10" (sn-10mb) or 1 x 12" (sn12-B) only p.audio
wave guide : CL-WG + PH-CL25 + sn-d44
Thanks
hi, mr.alexit I'm sorry story at you want.
Show images and your signature prease.
ถึงแม้จะทองแดง แต่ก็จริงใจ จาก ฅนไทย มิวสิค
-
I ask excuse but I do not know the thaiwan language, I don't have a plan I ask aid you in order to develop this idea, the photos is only an example,I have tested the plan tsh-112 but not sound well with the woofer p.audio sn-12B, I ask you if you can help to construct a new line array cabinet. I'm italian man, live in italy the attached photos in example are coming from this link http://www.forum.poweraudio.ro/viewtopic.php?t=1197
-
any idea for cabinet ???? http://img15.imageshack.us/i/arrayline221i.jpg/ http://img26.imageshack.us/i/arrayline222i.jpg/
welcome! alexit this design is the Br cab. the drivers are in symmetry line. p audio 10 mb i example to simulate on win isd, its about 15 litres/each br. 4time=60 litres if design on ur pic. the angle of the mid bass often see 90*60. but on the pic's about 90*15 degree. alexit u can try simulate with win isd by ur self. it's freeware and very simple. and if u have the problem about this design, u can post it on diyaudio or hometheatershack forums i and all members can help u to the right way. and i have the design Mini Line Array Cabinet (http://www.4shared.com/file/DysG6MGO/Mini_Line_Array_Cabinet_Loudsp.html) it may help u a lot to consider about line array design.
(http://image.free.in.th/z/il/6alex.jpg) (http://image.free.in.th/show.php?id=877b3d781955ac84bab477cf1e8a26df)
Thanks: ฝากรูป (http://www.uppicweb.com) dictionary (http://www.dictionary.in.th)
-
Welcome to thailand alexit..... smileyy
-
is possible to work the p.audio sn12B not MB on cabinet tsh-112 http://www.tiggersound.com/webboard/index.php?topic=45884.0
-
is possible to work the p.audio sn12B not MB on cabinet tsh-112 http://www.tiggersound.com/webboard/index.php?topic=45884.0
เอาแล้วดิ ฝรั่งอยากได้สูตรลำโพงพี่ไทย ใครเก่งมาช่วยหน่อยครับ smileyy
-
my prototipe of tsh-112 is 1 x p.audio sn-12B and 2 x driver p.audio sn-D44 , bat the sn-12B dont work correct on full range , any idea for change the parameter box ???
-
ํYour welcome to www.tiggersound.com (website from thailand)
Here are friendly and have by professional verymuch.You can idea to soundmachine
Then you have the plan right.
Please your signed image. Sorry I can't speek english.
-
ผมแปลคร่าวๆ ไม่รุว่แปลถูกรึเปล่านะครับ ประมานว่าเขามีสูตร tsh-112 เป็นต้นแบบแล้วเขามีดอก Pa sn-12B กับแหลมไดว์เวอร์ SN-D44 แต่เขาว่าดอก sn-12B มันไม่เหมาะกับทำแบบ fullrang เขาจึงอยากให้เราช่วยกันออกแบบตู้ลำโพงที่ทำให้ sn-12B มันออกแบบ fullrang สงสัยเขาจะเอามาทำลำโพงแบบ fullrang มั้งครับ
แปลเดาๆเอานะครับ
-
ยูใสน้อ...อาจารย์เจี้ยม จัดให้เพินแน
-
โอเคฉันเข้าใจ sn12B แบบไม่ดีสำหรับครบวงจร
-
my prototipe of tsh-112 is 1 x p.audio sn-12B and 2 x driver p.audio sn-D44 , bat the sn-12B dont work correct on full range , any idea for change the parameter box ???
the sn-12B can not run fullrange. u must have sub wooffer with play on the ground. the sn-12B respond low frequency is about 200 hz. u must drive the sub from low 40-50 hz to 200 hz. and here the sn-12B gragh. its only want a little volume box. its very slim like the bose line array. u must have the sub for fullrange. the sn-12b will operate about 200-3000 hz . its not importance to use 2*p.audio sn-D44. u must see the sentivity of woofer and compression chamber tweeter before design.
(http://image.free.in.th/z/ie/asn12.jpg) (http://image.free.in.th/show.php?id=3dda4a16ad8474d2678e40e3556c9198)
Thanks: ฝากรูป (http://www.uppicweb.com) dictionary (http://www.dictionary.in.th)
-
16.85 litres u must plus the driver displacement volume. at first u must calculus the volume from ur sn-12b driver. i suppose 5 litres that's mean 16.85+5=? this result is the real volume for ur design
-
this's the graph i simulate about 200 watts and get spl 120 db. alexit the sn-12B can not use with tsh-112 box. the sn-12 parameter driver isn't suitable for that box.
(http://image.free.in.th/z/iv/isn12.jpg) (http://image.free.in.th/show.php?id=bc7f49a74d89429ed012a28605c43941)
Thanks: ฝากรูป (http://www.uppicweb.com) dictionary (http://www.dictionary.in.th)
-
and this the cone excursion graph. the sn-12b has a little x-max. i simulate about 250 watts. it begin to has the non linear about 70 hz to lower. therefore the sn-12b don't give the lower respond freq.
(http://image.free.in.th/z/ir/hcone.jpg) (http://image.free.in.th/show.php?id=f1b77b28ed78f3245be772a17018eaf8)
Thanks: ฝากรูป (http://www.uppicweb.com) dictionary (http://www.dictionary.in.th)
-
the sn-12b only operate at the upper bass respond. the group delay isn't has any problem. if u have the sn-12b please u see the line array from bose. u'll have the idea.
regards
TW
(http://image.free.in.th/z/iz/delay.jpg) (http://image.free.in.th/show.php?id=940bba1e079b8f56066939ac49a563ea)
Thanks: ฝากรูป (http://www.uppicweb.com) dictionary (http://www.dictionary.in.th)
-
this's the graph i simulate about 200 watts and get spl 120 db. alexit the sn-12B can not use with tsh-112 box. the sn-12 parameter driver isn't suitable for that box.
(http://image.free.in.th/z/iv/isn12.jpg) (http://image.free.in.th/show.php?id=bc7f49a74d89429ed012a28605c43941)
Thanks: ฝากรูป (http://www.uppicweb.com) dictionary (http://www.dictionary.in.th)
ใช่ครับคุณ Powerjame.. เนื่องจากต้นแบบมาจากJBLครับ ปริมาตรจึงไม่แมทกับดอกรุ่น SN-12B
แล้วตู้BOSEที่ว่าเป็นรุ่นไหนครับ
แต่ตู้BOSEผมว่าไม่เด่นด้านคอนเสิร์ตกลางแจ้งเท่าไหร่นะครับ
-
ok for new project similar D&B q1
(http://i53.tinypic.com/23h3q6h.jpg)
(http://i51.tinypic.com/xpu5a8.jpg)
(http://i51.tinypic.com/72wzg4.jpg)
only p.audio component 2 x 8" 10" 12"
request help for draw plans for similar cabinet
-
ช่างสรรหางานมาให้ทำจริงๆคุณalexit เอาเยอะจัง 8"10"12"
แต่ก็ดีนะครับ จะได้แชร์ความรู้กัน
ว่าแต่รอคุณPowerjameคำนวนให้ก่อนแล้วกันนะครับ แล้วผมจะลองออกแบบให้ แต่ถ้าว่างก็จะช่วยคำนวนให้ครับ
หรือไม่ก็ท่านjiambond ทั้งคำนวน ทั้งออกแบบเลย
-
ผมขอขอบคุณทุกคนสำหรับความช่วยเหลือพวกเขาให้ฉันหวังว่าจะเขียนได้ดีกับนักแปลออนไลน์
MANY THANKS for all
-
ขอบคุณครับสมาชิกทุกท่านที่ช่วยกันสื่อความหมายกับชาวต่างชาติ(น่าจะมีคำแปลมาให้สักหน่อยนะครับ)
วันไหนมนุษย์ต่างดาวกระทู้มาผมรับอาสาแปลให้เองครับ
-
ขอบคุณครับสมาชิกทุกท่านที่ช่วยกันสื่อความหมายกับชาวต่างชาติ(น่าจะมีคำแปลมาให้สักหน่อยนะครับ)
วันไหนมนุษย์ต่างดาวกระทู้มาผมรับอาสาแปลให้เองครับ
เดี๋ยวไปหาเมียฝรั่งมาแปลให้..อิอิ brow
-
google crome พอจะช่วยได้
-
ok for new project similar D&B q1
(http://i53.tinypic.com/23h3q6h.jpg)
(http://i51.tinypic.com/xpu5a8.jpg)
(http://i51.tinypic.com/72wzg4.jpg)
only p.audio component 2 x 8" 10" 12"
request help for draw plans for similar cabinet
a few days didn't come because i was very busy with my works. alexit i've just seen the D&B q1 homepage. many things from the D&B q1 makes me consider. the type of line array like mtm type. i see your pics to post the start point of drivers will ok. thinking that lobbing erors will not have the problem from this. by usually do mtm type the drivers position are close to close. it depends on the wave length. but with D&B q1 i don't sure the distance from driver to driver. see the pics that seems the woofer installs on baffle likes v shape. about 45 degree that i think. alexit this speaker isn't difficult to design but... when i check all ur parameter drivers. all of them must be use with horn load type. they work and operate the bandwidth of mid bass horn. as the same D&B q1 from their homepage. they only build to operate the mid bass about 60 hz,it will roll off[their drivers are not only work for horn] and they use subwoofer works with it. alexit if u still don't buy these drivers. u might change to another drivers. sometime will ok.